Installer commissioning a pole-mounted Volt Time Two Pro

Construido para acertar a la primera

Nos enfocamos en una cosa: asegurar que tus instalaciones funcionen a la primera, siempre. Porque un gran soporte es valioso-pero no necesitarlo es aún mejor.

Productos que funcionan

Cada cargador sale de nuestras instalaciones probado. Cada actualización de firmware está validada. No enviamos problemas.

Menos retornos

Cuando las instalaciones funcionan a la primera, no tienes que volver a arreglar el problema de otro.

Soporte cuando lo necesitas

Cuando las cosas se complican, estamos de tu lado. Humanos reales, respuestas reales, realmente rápido.

Compare the range

Which charger fits which project

Every model runs on Plugchoice and speaks OCPP, so the choice comes down to metering, connections and how it installs. Here is the whole range side by side.

Comparison of the Volt Time charger range
PropertyOneOneHomeOne BusinessOne BusinessHome and businessTwo ProTwo ProParking and fleet
Project fit
Recommended forCharging at homeHome charging with reimbursement, and company sitesParking, owners associations and fleet
Connections112
Socket or fixed cableFixed cable, 7 mSocket, with or without shutter2 sockets, type 2
Maximum powerTwo Pro takes one 44 kW feed and gives both cars a full 22 kW at the same time, without halving.1.4 - 22 kW1.4 - 22 kW44 kW in, 2 x 22 kW out
DisplayBuilt in5 inch touchscreen, own brandingTouch display with pricing
Metering and compliance
MID meterA certified meter is what makes a session billable to a third party.NoClass C, plus Eichrecht2 x class B
AFIR ad hoc paymentNeither model carries a bank-card terminal; ad hoc payment runs through the connected backend.NoThrough the backendThrough the backend
Suitable for ERE registrationERE registration requires a MID-certified meter, so the One cannot register sessions.No
Installation
Internal protectionThe 6 mA DC detection is what lets you skip a separate type B RCD in the panel.6 mA DC residual current monitoring30 mA AC and 6 mA DC (IEC 62955)2 x 40 A RCBO, resettable, plus 6 mA DC
Daisy chainingFewer supply cables per row of chargers, so less copper and a smaller panel.NoNo6 per supply, 15 per ethernet bus
MountingWall or poleWall or pole, on a contact plateWall or pole, on a contact plate
Ingress and impact ratingIP54 / IK08IP65 / IK10IP54 / IK10
Warranty24 months36 months36 months
Software and smart charging
OCPPOCPP 1.6JOCPP 1.6J + 2.0.1OCPP 1.6J
Plugchoice
Load balancing
Solar balancing
Power sharingAll smart charging runs in Plugchoice, on any OCPP charger. The licence is per connector, so a Two Pro needs two.
Dynamic energy prices
Connectivity
NetworkEthernet, wifi, bluetoothEthernet, wifi 6, 4G with SIM, bluetooth, RS485Ethernet, wifi, 4G with SIM
Stands out forLowest price, cable always attachedBilling grade metering in a compact wall unitTwo full speed cars from one supply

Integrated RCBO, daisy-chained power

Two Pro builds the RCBO into the charger, so the panel needs no separate RCD plus MCB: less to wire, less panel space, faster sign-off. And because protection lives in the unit, chargers chain on a single circuit: pull one cable run and feed through from charger to charger.

  • No external RCBO. Saves 150-300 euro in panel hardware and wiring per charger.
  • 40% less cabling. Feed through one charger to the next instead of home-running every unit.
  • 2x 40A RCBOs built in. 44kW in, 2x 22kW out on the Two Pro, ready to chain out of the box.
  • The customer resets it themselves. A trip is a ten-second fix at the side panel: no tools, no opening the charger, no van.
Side hatch open on a pole-mounted Volt Time Two Pro, showing the built-in RCBO

Sealed click-in install

On One Business and Two Pro, all wiring lands in the backplate. Mount the plate, land the conductors, then the charger clicks over the top, sealed. You never open the housing on site, and units swap without re-pulling the feed.

  • 15 minutes faster per unit. Every connection is accessible before the charger goes on the wall.
  • Sealed from the factory. The unit stays closed on site, rated IP65 on the One Business.
  • Swaps without rewiring. The feed stays on the plate; a service swap is click off, click on.
Landing the conductors in the terminal block of a mounted Volt Time Two Pro

Gestión de potencia

Potencia inteligente, configuración simple.

Balanceo de carga, integración solar, reparto de potencia-todo configurado en un solo lugar. Funciona con medidores de energía comunes desde el primer momento.

Fully wirelessNo cables between devices
RetroactiveAdd to existing installs
Any connectivityWiFi, Ethernet, or 4G
All grid typesTN, TT, and IT systems
Unlimited chargersNo cap on device count
Flexible groupingGroups, sub-groups and parallel groups
Plugchoice power management: live load balancing across a charger group

Metering setups

These four are examples, not the whole list. Power management works with categories of meters: Modbus kWh meters, P1, HAN and Linky smart-meter ports, and CT clamps. Supported models per type are listed in Plugchoice.

SparkySparkyP1 smart meter
FlintFlintModbus meter
Eastron SDM72DEastron SDM72DIndustrial Modbus
CT clampsCT clampsUp to 1000A+

Comisionado

Configura en menos de 3 minutos.

Plugchoice hace el comisionado tan simple como conectarse a WiFi. Sin configuración complicada, sin formación requerida.

  • Scan the charger from the Plugchoice app, answer a few questions, done
  • Or pre-configure everything in the portal before you arrive on site
  • Customer handover built in: they get the login automatically
  • No laptop, no training, works offline too

Soporte

Soporte real, realmente rápido.

You reach someone who understands electrical installations, and who can see the charger live in Plugchoice.

  • Call us directly. A direct line to the technical team, in Dutch, English or German.
  • In-app support. Contact us directly from within Plugchoice. We can see your installation while we talk.
  • Live visibility. We look at the same charger status and logs you do, and diagnose from there.
Explorar colaboración
Installer calling Volt Time support from the field

Mayoristas

Disponible a través de tu mayorista.

Pide productos Volt Time a través de tus canales mayoristas existentes. Mismo pedido, misma logística.

RexelSoneparTechnische UnieSolar Limburg

Preguntas frecuentes

Preguntas de instaladores

¿Puedo conectar múltiples cargadores en cadena?

Sí, de forma segura con RCBOs integrados. El Two Pro incluye RCBOs internos (interruptores diferenciales con protección contra sobrecorriente). Esto permite conectar en cadena de forma segura en un solo circuito sin protección adicional en el cuadro de distribución.

Espacio reducido en cuadro. Sin necesidad de RCDs o MCBs separados por cargador. Esto reduce significativamente los requisitos del cuadro de distribución y acelera la instalación.

¿El RCBO es fácilmente reseteable?

Two Pro: compartimentos laterales. Two Pro tiene compartimentos laterales dedicados para cada RCBO. Fácil acceso para reseteos rápidos sin abrir la unidad principal. Two Pro próximamente.

¿Tu balanceo de carga es seguro?

Cero incidentes de fusible. Hemos desplegado Balanceo de Carga Dinámico en miles de instalaciones sin un solo salto de fusible. El sistema responde en milisegundos para prevenir sobrecargas.

¿Necesitas respuesta más rápida?. Para instalaciones de misión crítica, usa conexión MODBUS al medidor de energía. Esto proporciona tiempos de respuesta inferiores a un segundo para los escenarios más exigentes. Detalles de carga inteligente

¿Qué tan rápido es tu soporte técnico?

Los socios tienen prioridad. Los socios e instaladores registrados reciben respuesta humana en menos de 5 minutos durante horario laboral. Sin chatbots, sin colas de tickets-ingenieros reales que entienden tu situación.

Múltiples canales. Contáctanos por teléfono, WhatsApp o email. Hablamos holandés, inglés y alemán. Ser socio

¿Ofrecéis servicio en ubicación?

Sí, en Holanda. Para instalaciones de socios en Holanda, ofrecemos servicio en ubicación cuando la resolución remota no es suficiente. Iremos al sitio y resolveremos el problema directamente.

Diagnóstico remoto primero. La mayoría de problemas pueden diagnosticarse y resolverse remotamente vía nuestro portal web. Solo enviamos técnicos cuando es realmente necesario, ahorrando tiempo a todos. Funciones del portal web

¿Dónde puedo comprar cargadores?

A través de nuestros socios mayoristas. Trabajamos exclusivamente a través de canales mayoristas establecidos. Consulta nuestra lista de socios para encontrar un distribuidor en tu región. Ver socios mayoristas

Precios por volumen disponibles. Para proyectos grandes, contáctanos directamente para precios personalizados y acuerdos de soporte dedicados. Consultas de socios

¿Listo para ser socio?

Únete a 200+ socios de instalación en toda Europa. Obtén acceso a gran hardware, soporte real y un mercado en crecimiento.

89Socios
3Países
1283Integrations supported