Dual socket, one feed
44 kW of AC into one unit, 22 kW to each of two cars simultaneously. Cable entry from the top, bottom or rear, with AC IN and AC OUT terminals on the wall-mounted backplate, so one feed loops cleanly from charger to charger.
Tested by
Two cars per unit, one feed per row
44 kW into one wall unit, 22 kW to each of two cars at the same time. Dual socket, daisychainable and AFIR compliant, designed from the ground up for parking infrastructure.
AFIR touch display
Full touch screen with real-time charging status and pricing information, so public and semi-public points show the tariff AFIR asks for. Ad hoc payment runs through the connected backend.
Built-in RCBO protection
Two independent 40A RCBOs inside, resettable via the lateral service window without opening the charger. The breaker itself carries separate European approvals from VDE and Intertek Semko.
Six chargers on one feed
Two Pro is built to be installed in rows: daisy-chained power and data, click-on backplates and RCBOs that reset from outside.
Learn about smart chargingDaisy-chainable
Chain up to 6 Two Pros on a single AC feed and up to 15 units on one Ethernet bus, both at the same time. Cuts trenching, cabling and labour costs significantly on every row of parking spots.
Click-on backplate
Steel backplate mounts first. AC IN, AC OUT and Ethernet wire into 25 mm2 terminals with M40 glands, then the charger clicks on. Units swap or service without re-pulling the feed.
Works with any backoffice
Ships with 4G and a SIM included, online the moment it powers on, with Wi-Fi and Ethernet built in as well. Underneath runs Plugchoice: an open REST API, an OCPP proxy to any backoffice, and 250+ platform integrations, so you can switch operators remotely.
Explore all integrationsBuilt to live outside
IP54 and IK10 in a polycarbonate body that shrugs off hammer hits, kicks and the daily abuse of public parking. Rated from -30 to +50 degrees C, and the cold rating is confirmed by an independent CB test certificate.
Safety built in
30mA AC and 6mA DC leakage detection (IEC 62955) plus two independent, resettable 40A RCBOs, so no external Type B RCD is needed. The breaker inside is separately approved by VDE and Intertek Semko.
Our quality and safety standardsPlugchoice Smart Charging included
Site-wide power management, wireless. Load balancing via P1, CT clamp or Modbus protects the main fuse, solar balancing routes surplus PV into the cars, peak shaving holds a configured grid ceiling, and dynamic tariff charging follows the cheapest hours. The Smart license is included with the charger and runs for the operational lifetime of that charger on the platform.
See how smart charging works★★★★★ 4.7 on Trustpilot
Trusted by professionals across Europe
The reviews keep coming back to the service behind the charger.
Service and after sales is very good! Had an inverter with a Modbus issue. The support team thought along and fixed it within a day.
★★★★★ Yorick L., Oct 2024
In-app & email
End-customer support
Drivers reach our team straight from the Plugchoice app or by email. Their questions land with us, not with the partner who installed the charger.
<5 min
Phone response for partners
Installers and partners call us directly and get an engineer on the line, usually within 5 minutes.
99.98%
Platform uptime
Chargers, billing and smart charging run on the Plugchoice cloud, monitored 24/7.
Technical specifications
The complete Two Pro specification.
Performance
Input Capacity1-phase or 3-phase, 6-63A (1.4-44kW)
Output2x Type 2 Socket (3x32A each, up to 22kW)
Supply400V AC, 3P+N+PE, 50/60Hz
Energy Meters2x MID Class B certified (<1% accuracy)
Standby Consumption~5W
Connectivity
ProtocolOCPP 1.6j, REST API via Plugchoice
NetworkRJ45 Ethernet, WiFi 2.4GHz, 4G LTE (SIM included)
Daisy-chain6 per AC feed, 15 per Ethernet bus
IdentificationRFID MIFARE 13.56 MHz
Start ModesAutostart, RFID card, app
App & PortalPlugchoice app & web portal
Physical
Dimensions540 x 360 x 199 mm
Weight~10 kg
EnclosurePolycarbonate, matte black
ProtectionIP54, IK10
Operating Temp-30°C to +50°C
MountingWall mount, pole mount optional
Safety & Compliance
Circuit Protection2x 40A Type C 30mA AC RCBO (resettable via side window)
DC ProtectionBuilt-in 6mA DC RCM (IEC‑62955)
CybersecurityEN 18031-1:2024 certified (RED)
Grid TypesTN, TT, IT
Warranty36 months
Certified and independently tested
Two Pro ships against the paperwork professional installations demand: EU safety and radio conformity, RED cybersecurity, billing-grade metering and an automotive-grade production line.
CE, RED 2014/53/EU
Assessed by TÜV Rheinland
Volt Time's own EU Declaration of Conformity, applying 24 standards including EN IEC 61851-1 and EN IEC 62955.
IEC 61851-1 CB certificate
IECEE CB Scheme
International safety certificate for the exact model we ship, independently corroborating the -30 degrees C rating.
EN 18031-1:2024
Bureau Veritas certified
The RED cybersecurity requirement that is catching chargers out across the EU. Certified for our exact model.
AC V2G, paving the way
IEA Task 53 pre-test at DEKRA
The hardware platform behind Two Pro completed the first AC V2G pre-test of IEA Task 53 (INBID) at the DEKRA lab in the Netherlands, against ISO 15118-20. A milestone on the road to bidirectional charging: no certificates issued yet.
RCBO approved twice
VDE and Intertek Semko
The breaker inside carries its own European approvals to EN 61009, from VDE in Germany and Intertek Semko in Sweden.
IATF 16949 production
Automotive-grade quality system
Built on an automated line in an IATF 16949 certified facility, by a manufacturing partner also holding ISO 9001 and ISO 14001.
Power management for the whole site
Every Two Pro ships pre-paired to the Plugchoice web portal. One live diagram shows the grid connection, every group and every socket, with the power flowing between them in real time.
- Load balancingVia P1, CT clamp or Modbus, wireless
- Solar balancingSurplus PV routed into the cars
- Peak shavingHolds a configured grid ceiling
- Dynamic tariffsFollows day-ahead spot prices
- Per-socket billingMID readings, exports and payouts
- Self-healing opsStuck sessions retried automatically
Common questions
Daisy-chaining, AFIR, billing, connectivity and maintenance.
Can I daisy-chain multiple Two Pro chargers?
Yes, built for it. Daisy-chain up to 6 Two Pros from a single AC feed, and up to 15 chargers on one Ethernet bus. Each unit has built-in 2x 40A RCBO protection, so no extra switchgear is needed per charger.
Simple power distribution. Cable entry points at the top, bottom and rear give you maximum flexibility. A dedicated AC OUT terminal next to AC IN, sized for 25 mm2 solid-core through M40 glands, keeps the loop tidy. Use flat ribbon cable (vlakbandkabel) for the cleanest run inside the backplate.
Removable backplate. The Two Pro mounts onto a separate steel backplate that is fixed to the wall first. AC IN, AC OUT and Ethernet wire into the backplate before the charger is clicked on, so installers can stage the wiring without holding the unit, and a single charger can be swapped or serviced without re-pulling the feed.
What does AFIR compliance mean for my installation?
Required for public charging. The Alternative Fuels Infrastructure Regulation (AFIR) requires public and semi-public charging points to display pricing and allow ad-hoc payment. Two Pro's touch display shows the tariff, and ad-hoc payment runs through the connected backend.
Future-proof compliance. AFIR requirements are being rolled out across Europe. Installing AFIR-compliant chargers now means you won't need to retrofit or replace hardware when regulations tighten in your region.
How does billing work with the MID meters?
Two independent meters. Each socket has its own MID Class B certified meter with less than 1% accuracy. This means you can bill per socket independently, with legally compliant energy measurements.
Connect to any billing platform. Use OCPP 1.6j to connect to any billing backend. Plugchoice's Proxy feature makes it easy to integrate with your preferred charge point operator or billing platform.
What connectivity options are available?
Three options included. Every Two Pro ships with 4G LTE connectivity (SIM included), WiFi 2.4GHz, and an RJ45 Ethernet port. Use whichever fits your infrastructure best.
Reliable in any environment. Underground parking runs on Ethernet, an outdoor lot on 4G. The charger reconnects automatically and buffers transactions when the connection drops.
What about maintenance and servicing?
Minimal maintenance needed. Two Pro is rated IP54 and IK10, built to withstand harsh outdoor conditions. There are no moving parts and no consumables to replace.
Easy RCBO reset. If an RCBO trips, open the lateral service window and reset it, without opening the charger or calling an electrician. A facility manager can do it.
Still have questions? Contact our team
Plan your parking site
Get in touch with our team or connect with a certified installer to plan your parking charging deployment.
36 months warranty | 94+ certified installers | Designed in the Netherlands